|
|
|
| Phone Us |
|
|||
|
C&D Technologies Model: HFM48BC50 PN: 100-7500-00 |
||||
)
(Click image to enlarge)
|
Switched Mode The module rectifiers can be used in redundant or non-redundant modes. The modules are shelf-mounted and can be installed or removed while the system is operational. Modules include front panel indicator LEDs, input and output circuit breakers, and a 3.5-digit ammeter. The unit incorporates a field-replaceable cooling fan and an insert/extract handle which makes connections/disconnects trouble-free. Load Sharing Forced or passive load sharing between modules of the same operating voltage is provided in order to offer equal power distribution from no load to full load between modules in parallel applications. Designed for all applicable international safety requirements, including EMI filtering to FCC and VDE-0875, Class N limits. Efficiency The rectifier is High Efficiency (90 percent). |
|||
|
Voltage Nominal output voltage is 48 VDC; 50 ADC per Rectifier or 200 ADC per shelf. Gives active power factor correction, 0.99 PF. Shutdown The rectifier has a built-in, High-Voltage Shut Down (HVSD) function. No single component failure (short or open) will result in an output voltage greater than 60 volts. After a remote HVSD signal is received or an internal shutdown occurs, the rectifier may be reset locally or remotely. Self Mounted The modules are housed in a shelf, which is designed to mount in a 23-inch relay rack. Each shelf houses up to four modules. DC output connections are made on the side of the shelf, AC input connections are made inside the shelf. |
) (Click image to enlarge) |
|||
MIP Inc, 1015 Elrod Road, Piedmont, South Carolina 29673
864-269-5895 - FAX 864-269-5898 After Hours Emergency Telephone Number - (864) 269-5895 , Ext 30
|
